FD51 Series Components

The FD51 series all use similar components except FD51-4PE. This will be changing with an upgrade planed for FD51-4PE to both improve performance and maintain the same components (washers instead of 5mm magnets)

FD51-4OS

  • 2x 15x10mm N35 Disc magnets
  • 4x 14 or 15mm diameter steel washers (Optional but improves performance)
  • 0.17mm Enamelled Copper Wire (US 33 or 34 AWG) [4M per driver]
  • Contact Adhesive Glue

FD51-4PM

  • 2x 15x10mm N35 Disc Magnets
  • 9x 14 or 15mm diameter steel washers (Required)
  • 0.17mm Enamelled Copper Wire (US 33 or 34 AWG) [4M per driver]
  • Contact Adhesive Glue

FD51-4PE

  • 2x 15x10mm N35 Disc Magnets
  • 7x 14 or 15mm diameter steel washers (Required)
  • 0.17mm Enamelled Copper Wire (US 33 or 34 AWG) [4M per driver]
  • Contact Adhesive Glue

Kit options now available!

After a bit of a wait to get parts in, I now have everything to offer a kit. The money made from this will go directly back into the development of drivers, and gives you a ‘one stop shop’ option. The kit can be used, along with your 3D printed parts to create the following models:

  • FD51-4OS
  • FD51-4PM
  • FD51-4PE
  • WF81
  • Tenacious 6

The Kit is £15 before shipping, and contains the following:

  • 12x 15x3mm magnets (6 used per driver)
  • 18x 15mm Washers
  • 4x 4M of 0.17mm Enamelled Copper Wire
  • All Purpose Glue

This gives you the magnet motor components to make a pair, and enough wire and glue to assembled 4 drivers. This enables you to experiment if you want to try different drivers, and also acts as spare parts if you happen to have a failure with the assembly of a driver.

Kits will be available on my eBay page which can be found here:

Alternative links to components:

None of the following links are affiliated or supported by myself. The UK based ones are places I have personally purchased from, and alternatives are suggestions brought about by supportive fans from across the world!

UK

  • 15x10mm Disc Magnets
  • 0.17mm Enamelled Copper Wire
  • 14mm Steel Washers
  • Contact Adhesive Glue

US

  • 15x10mm Disc Magnets
  • 33 / 34 AWG Enamelled Copper Wire

15mm Steel Washers

Contact Adhesive Glue

Aliexpress Links

These will likely be your most cost effective links, but expect long wait times, and these will not of been tested suppliers.

%d bloggers like this: